Andrew ES45T Uživatelský manuál stáhnout pdf (Strana 33)

Step 2

Step 3

Installation Procedures

Loosely attach tee plates (P/N 202447) to points B, F and D on convex side of reflector

as shown in Figure 35.

• Use A-325 ½ x 1-¼ in. bolts, flatwashers and nuts. (see page 12).

• Insert bolts from concave side of reflector

Figure 35

Loosely attach plates (P/N 49427) to points A, C and E on convex side of reflector.

Loosely attach two support angles (P/N 49438) to each of six plates as shown in Figure

36.

• Use A-325 ½ x 1-¼ in. bolts, flatwashers and nuts. (see page 12)

• Install bolts from concave side of reflector

• Angles should be installed with flat side towards back side of reflector

Figure 36

ES45T-R Reflector Assembly

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 80 81

Žádné komentáře

Andrew ES45T Uživatelský manuál Strana 33